How to Make Earphone and How does Earphone Works

There is nothing as exciting as making your earphones and using them. It might look complex, but the science of how earphones work is very easy to understand. Once you understand it, you can easily make your earphones.

How Do Earphones Work?

Before we look at the ways in which you can make your earphones, let us first discuss how they work.

Here are some basic principalities of how an earphone works:

It’s all about completing the circuit

At its basic level, an earphone is all about completing the circuit. In as much as an earphone may look so complex, it is just a loop of wire with currents passing through it. Electric currents interact with a magnet that pushes the air, which produces the sound. So, to produce electric currents, you must complete a circuit.

Parts of earphones

To understand how earphones work, you will need to know the different parts of earphones and their work in helping to produce sound.


Speakers of earphones are just like other speakers, just that they are smaller and put very close to your ears. They are usually too small that they fill the ear’s outer void.


Transducers are the devices responsible for converting energy from one form into another. In an earphone, there are two transducers that convert your device’s energy into sound energy. Just like any other circuit, an earphone has a conductor that draws energy from the source and provides it to the load, which is the transducer.

The Jack

The jack is what connected the conductor to the source. The tip of the jack has the sleeves that power the right and left earphones.

Read also:

How to Make Earphones

It is possible for you to make earphones on your own. With the knowledge of how earphones work, you should follow the steps below:

Steps 1:

The first step is to find an earphone cable, a cup, a wire, and a magnet. These are the basic things that you will need for a DIY earphone.

Step 2:

Use the wire to wrap around the plastic cup. You will need to tape it down to ensure it is stationary.

Step 3:

The third step is to connect the loop to the earphone cable. It is important that you use a pair of wires that go to the same side, lest your earphones will not work.

Step 4:

Finally, add a magnet to the cup (at the bottom) and plug your new speaker into your phone.

As simple as that, you can create your earphones at home.

How to Choose Better Headphones to Reduce Damage of People Hearing

Did you know that about 20% of the population is struggling with hearing problems? Well, a majority of these problems are caused by excessive use of headphones. While using headphones isn’t a bad thing, using the wrong headphones could lead to severe hearing problems.

For this reason, we will discuss tips for choosing better earphones that will help to reduce the damage of people hearing.

Top 4 tips of choosing better headphones to avoid hearing damages

The following are the main considerations for effective headphones that reduce the probability of hearing damage.

  1. Brand

One of the things that you should consider when buying your headphones is the brand. Well, if you are looking for great headphones that will reduce hearing damage, you must make a good investment. And by this, you should invest in a trusted brand.

Most of the trusted brands have better standards for their headphones. A majority of top brands use scientific research in the process of manufacturing their headphones. This helps in reducing probable hearing problems as they are tested before released.

  1. Clarity of the headphones

If you have a low budget and cannot afford the top brands, you should consider the clarity of the headphones as a major factor that will help you to get better headphones that reduce hearing damage.

As a tip, you should test the headphones for their clarity before buying them. A clear headphone is less likely to cause any hearing problem in the future.

  1. Style and comfort

The style and comfort of the headphones always determine whether the headphones will cause hearing damage or not. This is because if it has a faulty style, your ears will be uncomfortable, and mostly struggling to adapt to the headphone’s structure. This constant struggle by the ears will ultimately result in hearing problems.

Therefore, choose headphones that are adaptive to your ears, and not the other way round.

  1. Buyer reviews

Finally, you need to consider what other buyers are saying about the headphones you intend to buy. As a keen buyer, you should read the reviews of the headphones, and put much focus on their ability to protect your ears. If you notice that many buyers are complaining about certain headphones, you should avoid them as they are likely to damage your ears.

Read also: Top 20 Best Phones with Infrared IR Blasters

Ultimately, you have the responsibility of protecting your ears, thus, you should use the above-mentioned tips when choosing better headphones to reduce the damage of people hearing.